Simple job for a Saturday morning, took the opportunity to drill the holes and position the auxiliary switches into the lower instrument panel.
The beauty of the kitcar is each one is individual. I elected to fit the 12v socket, fog lamp and horn switches tot he panel but have for now left room for a starter button which i also fancy fitting (probably when Iva'd and on the road)
so with the switches selected and layout marked out on the panel, time to get to work with the stepped drill bit and carefully drill the holes not getting too carried away with drilling too much!! - little steps and keep checking until each switch fitted nicely through.
Clean up the swarf, remove the masking tape and hey presto holes drilled ready for the switches